Outdoorking Product Description ©: PROKUT™ 20" x .325" x .058" x 78 DL Or 79 DL, BB Mount, Semi-Professional Laminated Multi-Rivet Sprocket Nose Guide Bar
Replaces OEM: OREGON® 208SLGK095
Length: (inches) 20"
Length: (cm) 50 cm
Pitch: .325"
Bar Type: Semi-Professional Laminated Multi-Rivet Sprocket Nose Guide Bar
Chain / Cutter Type: 38S / Semi-Chisel or 38F / Full-Chisel
Bar Mount Type: BB
Gauge: .058"
Drive Link Count: 78 DL (most) Or 79 DL (Some, as listed above)
Teeth: 12 Tooth sprocket nose
Recommended Saw Sizes: 38 cc to 62 cc (2.3 to 3.8 cu. in.)
Fits: Alpina 460, 510, 540 and 550 models. (These models use a 78 drive link chain).
Fits: Dolmar 109, 109HS, 110, 110i, 111, 111i, 115, 115i, PS-410, PS-411, PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105 and PS-5105 H models. (These models use a 78 drive link chain). Note: Please check your saw carefully prior to ordering, some of the above saw models were also released fitted with a 3/8" pitch chain. PS410 After Serial # 34576 & PS411 After Serial # 33571 use NARROW CUT only.
Fits: Efco 141SP, 147, 152, 156, 165, MT 5200 models. (These models use a 78 drive link chain).
Fits: Fairmont Hydraulic 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513 and LIMBLOPPER models. (These models use a 78 drive link chain).
Fits: Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 140, 154, 234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257, 261, 262, 262 XP, 336, 339 XP, 340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353, 353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 435, 435 e, 440 e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 e
RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 543 XP, 543 XPG, 545, 550 XP, 550 XPG, 555, 560 XP, 560 XPG, 1200 Electric and 1500 Electric models. (These models use a 78 drive link chain).
Fits: Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521, 525, 535, 2050, 2050 TURBO, 2051, 2054, 2055, 2149, 2149 TURBO, CS2141, CS2141S, CS2145, CS2145S, CS2149 TURBO, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S and CS2255 models. These models use a 78 drive link chain). Note: Please check your saw carefully prior to ordering, some of the above saw models were also released fitted with a 3/8" pitch chain.
Fits: Makita DCS 430, DCS 431, DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121 and DCS 5200i
models. (These models use a 78 drive link chain). Note: Please check your saw carefully prior to ordering, some of the above saw models were also released fitted with a 3/8" pitch chain.
Fits: Makita DCS410, DCS411, DCS430. (These models use a 78 drive link chain). Note:
DCS410 After Serial # 34576 & DCS411 After Serial # 33661 use NARROW CUT only.
Fits: McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MAC 2818 AV, MS
1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS
2049 AVCC, MS2050, PM 1845 AV, Pro Mac: 40, 46. PM4300, PM4700, PM5000, PM5200,
SILVER EAGLE: 2818, 3020 and TIMBER BEAR 20 [later models]. (These models use a 78
drive link chain).
Fits: MTD 152 models. (This model uses a 78 drive link chain).
Fits: Oleo-Mac 925F, 938, 940C, 941, 941 CX, 942, 945, 946, 947, 947F, 950, 951, 952, 956 and 962 models. (These models use a 78 drive link chain).
Fits: OPEM K1 and K2 models. (These models use a 78 drive link chain).
Fits: Parklander GL4500M-18 models. (This model uses a 78 drive link chain).
Fits: Partner 360, 400, P-360, P-400, P-450, P-500 and P-5000 models. (These models use a 78 drive link chain).
Fits: Pioneer 1074, P-21, P-26 and P-28 models. (These models use a 78 drive link chain).
Fits: Poulan / Poulan Pro 325 models. (This model uses a 78 drive link chain).
Fits: Redmax G390, G450AVS, G455AVS, G5000, G5000AVS and G5300 models. (These models use
a 78 drive link chain).
Fits: Ryobi RFS4518 and RFS5418 models. (These models use a 78 drive link chain).
Fits: Sina SCS4500I models. (This model uses a 78 drive link chain).
Fits: Solo 613, 614, 631, 632, 634, 638, 639, 641, 644, 645, 647, 650, 651, 652, 651 SP, 654, 656 and 656 SP models. (These models use a 79 Drive link chain).
Fits: Stanley Hydraulic CS05 and CS06 models. (These models use a 78 drive link chain).
Note: Please check your saw carefully prior to ordering, some of these saw models were also released fitted with a 3/8" pitch chain.
Fits: Tanaka ECV 5601 models. (This model uses a 78 drive link chain).
Fits: Zenoah G390, G450AVS, G455, G455AVS, G500, G5000, G5000AVS and G5300 models. (These
models use a 78 drive link chain).
Features:
• Semi-professional laminated multi-rivet sprocket nose guide bar
• Light-weight slim contour, for excellent manoeuvrability
• Super tough chrome-moly steel, superior bar body strength and tough rails with excellent resistance to wear and chipping
• All PROKUT™ guide bars are reversible for longer life
Please Note: Use with our semi-chisel chain loop part numbers GAF38S078DL (78 drive links) and
GAF38S079DL (79 drive links) or our full-chisel chain loop part numbers GAF38F078DL (78 drive links) and GAF38F079DL (79 drive links) applications as per the model fitment applications listed above. For a solid professional replaceable sprocket nose guide bar option use our part number GAFBB2038RS. For a 78 drive link bar and chain combo option use our part number GAF105714. Replaces our part number OMK208SLGK095
